[1]杨红,肖臻,周彦,等.空气雾化硫磺喷枪的数值模拟[J].武汉工程大学学报,2013,(12):63-67.[doi:103969/jissn16742869201312013]
YANG Hong,XIAO Zhen,ZHOU Yan,et al.Numerical simulation of air\|atomizing sulfur gun[J].Journal of Wuhan Institute of Technology,2013,(12):63-67.[doi:103969/jissn16742869201312013]
点击复制
空气雾化硫磺喷枪的数值模拟(
/HTML)
YANG Hong,XIAO Zhen,ZHOU Yan,et al.Numerical simulation of air\|atomizing sulfur gun[J].Journal of Wuhan Institute of Technology,2013,(12):63-67.[doi:103969/jissn16742869201312013]
/HTML)《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]
- 卷:
- 期数:
- 2013年12期
- 页码:
- 63-67
- 栏目:
- 化学与化学工程
- 出版日期:
- 2013-12-31
文章信息/Info
- Title:
- Numerical simulation of air\|atomizing sulfur gun
- 文章编号:
- 16742869(2013)12006305
- 分类号:
- TQ027.3+2
- 文献标志码:
- A
- 摘要:
- 将空气雾化和机械雾化相结合，对硫磺喷枪进行改进.在Fluent软件环境下，基于气、液两相流模型进行了计算流体力学数值模拟.进口处以液硫、空气的实际速度为基准，出口处采用压力出口，焚硫炉内壁面选用标准无滑移壁面并假设其绝热，以简化焚硫炉内气液边界条件.以k\|epsilon湍流模型为计算模型，采用压力\|速度耦合方程求解，并选用压力修正算法.结果表明，在喷枪四周输入一定速度的空气后，喷枪附近形成一个涡流负压区，加速液硫向四周扩算，可增大雾化角及雾化行程，均匀雾滴分布.以某焚硫炉的工程实际参数，液硫速度5 m/s时，对比不同空气流速下的液硫雾化流场，在空气进口速度为4～6 m/s，雾化效果最佳.
- Abstract:
- Air atomization and mechanical atomization are combined to improve the performance of the sulfur spray gun. The FLUENT software was used to analyze the field of velocity on the basis of two\|phase\|flow model. The actual speed of liquid sulfur air was selected as the inlet boundary condition while the pressure was chosen as the outlet boundary condition .Standard no\|slip wall was adopted as the wall of sulfur furnace, which was assumed adiabatic to simplify the gas\|liquid boundary conditions of sulfur furnace. The k\|epsilon turbulence model was adopted as the calculation of the model, while the pressure\|velocity coupling equation and the pressure implicit with splitting of operators algorithm were applied to calculation. The results reveal that there is a negative pressure of vortex near the spray gun when a given velocity of air is steady，which accelerates the expansion speed of liquid sulfur，increases the angle and distance of atomization and makes the atomization distribution more homogeneous. Taking the data of a sulfur furnace, it demonstrates that the best atomization result comes up at 4~6 m/s of the inlet velocity when the speed of liquid sulfur is set at 5 m/s.
参考文献/References:
［1］冯晓民.硫磺制硫酸工艺研究［J］.上海化工，2007，8(11)：26\|27.FENG Xiao\|min.Using sulfur to improve the sulfuric acid technical process［J］. Shanghai Chemical Industry, 2007，8(11)：26\|27.（in Chinese） ［2］侯凌云，侯晓春. 喷嘴技术手册［M］.北京：中国石化出版社,2007：69\|72.HOU Ling\|yun,HOU Xiao\|chun. Handbook for nozzle technology［M］.Beijing: China Petrochemical Press,2007：69\|72.（in Chinese）［3］刘国雄.空气雾化涂料喷枪涂流场仿真及特性研究［D］.杭州：浙江大学图书馆，2012.LIU Guo\|xiong.Simulation study on the spray flow field of air atom paint spray gun［D］.Hangzhou: Zhejiang University Libraries System, 2012. ［4］韩占中.FLUENT\|流体工程仿真计算实例与分析［M］.北京：北京理工大学出版社，2009：266\|271.HAN Zhan\|yuan. FLUENT\|fluid simulation calculation of engineering examples and analysis［M］.Beijin: Beijing Institute of Technology Press, 2009：266\|271.（in Chinese）［5］杨红，王呈祥，肖臻穿流型搅拌器开孔位置的数值模拟［J］.武汉工程大学学报，2013,35(2):65\|68.YANG Hong,WANG Cheng\|xiang,XIAO Zhen.Numerical simulation of the hole position of punchecl impeller［J］.Journal of Wuhan Institute of Techology，2013,35(2):65\|68.（in Chinese） ［6］董志勇.射流力学［M］.北京：科学出版社，2005：15\|31.DONG Zhi\|yong. Jet mechanics［M］.Beijing: Science Press, 2005：15\|31.（in Chinese）
相似文献/References:
[1]杨 红,高志远,罗丹丹,等.硫磺喷枪的传热模拟及结构优化[J].武汉工程大学学报,2015,37(12):65.[doi:10. 3969/j. issn. 1674-2869. 2015. 12. 0１４]
,,et al.Ｐｒｏｃｅｓｓ ｓｉｍｕｌａｔｉｏｎ ａｎｄ ｓｔｒｕｃｔｕｒｅ ｏｐｔｉｍｉｚａｔｉｏｎ ｏｆ ｈｅａｔ ｔｒａｎｓｆｅｒ ｏｆ ｓｕｌｆｕｒ ｓｐｒａｙ ｇｕｎ[J].Journal of Wuhan Institute of Technology,2015,37(12):65.[doi:10. 3969/j. issn. 1674-2869. 2015. 12. 0１４]
备注/Memo
- 备注/Memo:
- 收稿日期：20131113基金项目：武汉工程大学研究生创新基金资助项目（CX201225）作者简介：杨红（1971\|），男，湖北宜都人，教授，博士.研究方向：新型高效过程装备技术、机械设备智能监控、虚拟现实技术及应用等.
常用功能
统计/Statistics
- 摘要浏览/Viewed6967
- 全文下载/Downloads3934
- 评论/Comments
