|本期目录/Table of Contents|

[1]徐军,伍建华,胡承威.片状钛酸钡颗粒的熔盐法制备及其形貌[J].武汉工程大学学报,2013,(07):49-53.[doi:103969/jissn16742869201307010]
　XU Jun,WU Jian hua,HU Cheng wei.Moltensalt synthesis and morphology of platelike barium titanate particles[J].Journal of Wuhan Institute of Technology,2013,(07):49-53.[doi:103969/jissn16742869201307010]
点击复制

片状钛酸钡颗粒的熔盐法制备及其形貌(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2013年07期
页码:
49-53
栏目:
资源与土木工程
出版日期:
2013-07-31

文章信息/Info

Title:
Moltensalt synthesis and morphology of platelike barium titanate particles
文章编号:
16742869(2013)07004905
作者:
徐军; 伍建华; 胡承威
武汉工程大学材料科学与工程学院，湖北 武汉 430074
Author(s):
XU Jun; WU Jianhua; HU Chengwei
School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430074, China
关键词:
熔盐法; 片状模板; 原位反应; 钛酸钡
Keywords:
molten salt synthesis;  platelike template;  in situ transformation;  barium titanate
分类号:
TM22+1
DOI:
103969/jissn16742869201307010
文献标志码:
A
摘要:
为了得到有利于晶粒择优取向的片状钛酸钡形貌颗粒，采用合成出的片状模板原料，通过熔盐法制备了片状钛酸钡颗粒.首先，以碳酸钾、二氧化钛和钛酸锂为原料，在氯化钾熔盐中制备了具有类纤铁矿层状结构的钛酸盐（K0.8Ti1.73Li0.27O4）.经酸交换后，得到了片状钛酸(H1.07Ti1.73O4，HTO）颗粒.HTO是一种具有层间通道结构和良好的离子交换性的片状模板，以HTO和碳酸钡为原料，氯化钠和氯化钾为熔盐，在820 ℃保温5 h得到纯相的钛酸钡，其颗粒形貌呈现为宽5~8 μm、长10~15 μm，厚度约1 μm左右的片状形貌, 而且这些片状颗粒是由1 μm的小片状颗粒按特定晶向排列而成.结果表明以HTO为模板的原位反应机制起了主要作用，产生保持了片状HTO模板形状的片状钛酸钡颗粒.该方法有望为制备织构化陶瓷提供良好各向异性钛酸钡粉体.
Abstract:
To obtain the platelike morphology of the barium titanate particles which is beneficial to form preferably oriented grains，platelike barium titanate particles were fabricated by molten salt method using a platelike precursor. First, a layered titanate (K0.8Ti1.73Li0.27O4) with a lepidocrocitelike structure was synthesized with potassium carbonate, titanium dioxide and lithium carbonate in potassium chloride salt, which, after treatment in nitric acid solution, was subsequently transformed to H1.07Ti1.73O4 (HTO) with the same layered structure and platelike particle morphology. By using HTO and barium titanate as raw materials, sodium chloride and potassium chloride as mixed molten salt, platelike barium titanate particles were synthesized at 820 ℃ for 5 h. The barium titanate platelets are 5-8 μm in width, 10-15 μm in length, and about 1 μm in thickness, which consist of small flake particles (1 μm in size) arranged in a particular orientation to form a lamellar morphology. The results show that insitu reaction with HTO as the template plays a dominant role in the formation of platelike barium titanate particles. This approach is expected to provide good anisotropic barium titanate powders for the preparation of texture ceramic provides.

参考文献/References:

［1］Buscaglia M T, Harnagea C, Dapiaggi M, et al. Ferroelectric BaTiO3 nanowires by a topochemical SolidState reaction\[J\]. Chemistry of Materials, 2009, 21(21): 50585065.［2］Setter N. Electroceramics: looking ahead\[J\]. Journal of the European Ceramic Society, 2001, 21(1011): 12791293.［3］Tian X L, Li J, Chen K, et al. Nearly monodisperse ferroelectric BaTiO3 hollow nanoparticles: SizeRelated solid evacuation in OstwaldRipeningInduced hollowing process\[J\]. Crystal Growth & Design, 2010, 10(9): 39903995.［4］Lines M E, Glass A M. Principles and applications of ferroelectrics and related materials\[M\]. Oxford: Oxford University Press, 1977: 244246.［5］Hakuta Y, Ura H, Hayashi H, et al. Continuous Production of BaTiO3 Nanoparticles by Hydrothermal Synthesis\[J\]. Industrial & Engineering Chemistry Research, 2005, 44(4):840846［6］赵巍 ，杜松昭，赵丹，等. 制备片状 BaTiO3晶体的研究进展\[J\].中国陶瓷，2012，48（1）： 15.Zhao W, Du S Z, Zhao D, et al. Study’s development on synthesizing the platelike BaTiO3 crystal\[J\]. China Ceramics, 2012, 48(1): 15. (in Chinese)［7］丁西亚，沈波，翟继卫，等．双重熔盐法制备片状 BaTiO3晶体\[J\]．硅酸盐学报，2009，37（8）：12821287.Ding X Y, Shen B, Zhai J W, et al. Preparation of tabular BaTiO3 powder by twostep molten salt method\[J\]. Journal of the Chinese Ceramic Society, 2009, 37(8): 12821287. (in Chinese)［8］Sato T, Kimura T. Preparation of<111>textured BaTiO3 ceramics by templated grain growth method using novel template particles\[J\]. Ceramics International, 2008, 34(4): 757760. ［9］李月明，Huang Dan, 廖润华，等．熔盐法合成晶体的研究现状与进展\[J\]．陶瓷学报，2008，29（2）：164169．Li Y M, Huang D, Liao R H, et al. Development of crystal synthesis by molten salt method\[J\]. Journal of Ceramics, 2008, 29(2): 164169. (in Chinese)［10］Feng Q, Hirasawa M, Yanagisawa K. Synthesis of CrystalAxisOriented BaTiO3 and Anatase Platelike Particles by a Hydrothermal Soft Chemical Process\[J\]. Chem Mater， 2001, 13(2)：290296.［11］徐军，冷浩博，伍建华．二维片状二钛酸钡颗粒的熔盐法合成\[J\]. 武汉工程大学学报，2012，34（7）：3740.Xu J, Leng H B, Wu J H. Synthesis of 2D platelike barium dititanate particle by molten salt method\[J\]. Journal of Wuhan Institute of Technology, 2012, 34(7): 3740. (in Chinese)

相似文献/References:

[1]徐军,冷浩博,伍建华.二维片状二钛酸钡颗粒的熔盐法合成[J].武汉工程大学学报,2012,(7):37.[doi:103969/jissn16742869201207008]
　XU Jun,LENG Hao bo,WU Jian hua.Synthesis of 2D platelike barium dititanate particle by molten salt method[J].Journal of Wuhan Institute of Technology,2012,(07):37.[doi:103969/jissn16742869201207008]
[2]徐军,唐甲,杨薇.锶掺杂二钛酸钡的熔盐法制备及其介电性能[J].武汉工程大学学报,2013,(06):40.[doi:103969/jissn16742869201309008]
　XU Jun,TANG Jia,YANG Wei.Synthesis of strontiumdoped barium dititanate and its dielectricproperties by molten salt method[J].Journal of Wuhan Institute of Technology,2013,(07):40.[doi:103969/jissn16742869201309008]

备注/Memo

备注/Memo:
收稿日期：20130421基金项目：教育部留学回国人员科研启动基金，湖北省教育厅科学研究重点项目（D20101504）.作者简介：徐军(1970)，男，湖北武汉人，教授，博士.研究方向：电子功能材料.
更新日期/Last Update: 2013-07-31