|本期目录/Table of Contents|

[1]高翔,胡进,唐腾飞.卧式高压釜快开装置设计[J].武汉工程大学学报,2014,(08):56-59.[doi:103969/jissn16742869201408010]
　GAO Xiang,HU Jin,TANG Teng fei.Design of quickopening device of high pressure autoclave[J].Journal of Wuhan Institute of Technology,2014,(08):56-59.[doi:103969/jissn16742869201408010]
点击复制

卧式高压釜快开装置设计(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2014年08期
页码:
56-59
栏目:
机电与信息工程
出版日期:
2014-08-31

文章信息/Info

Title:
Design of quickopening device of high pressure autoclave
文章编号:
16742869(2014)08005604
作者:
高翔; 胡进; 唐腾飞
武汉工程大学机电工程学院，湖北 武汉 430205
Author(s):
GAO Xiang;  HU Jin;  TANG Tengfei
School of Mechanical and Electrical Engineering, Wuhan Institute of Technology, Wuhan 430205, China
关键词:
快开装置; 快开机构; 液压传动系统; 可编程控制器
Keywords:
quickopening device;  quickopening mechanism;  hydraulic transmission system;  programmable logic controller
分类号:
TH39
DOI:
103969/jissn16742869201408010
文献标志码:
A
摘要:
设计了由快开机构、液压传动和电气控制系统组成的新型高压釜快开装置.首先，针对传统快开机构在结构设计上的缺陷，快开装置采用了新型结构设计方案，提高其可靠性和可维修性；其次，选用液压传动系统作为快开装置的动力源，并进行了液压系统设计与液压元件的选型；最后，设计了电气控制系统，采用可编程控制器控制以提高快开装置自动化水平，并制定了快开装置的工作流程，进行了程序的编写及调试.结果表明，该新型快开装置不仅能够平稳高效地实现高压釜端盖的开闭，易于后期维修保养，而且能较方便地实现远程控制，避免其操作人员受到安全威胁.
Abstract:
A new type of quickopening device of high pressure autoclave which consists of the mechanism, the hydraulic transmission system and the electrical control system was designed. Firstly, for the imperfection of the structure design of the old ones, a new structure designing scheme was adopted to improve the reliability and maintainability. Secondly, hydraulic transmission was used as the power source of the quickopening device, and the design of hydraulic system and the selection of hydraulic components were accomplished. Then, the electrical control system controlled by programmable logic controller was designed to improve the degree of automation. Finally, the workflow of the quickopening device was established and the program was written and debugged. Results show that this new type of quickopening device can efficiently and smoothly realize the opening and closing of the end cover, and is easy to be maintained and repaired at later stage, moreover it can conveniently realize the remote control to ensure the life safety of the operators.

参考文献/References:

［1］刘浩波．压力容器快开端盖开盖过程安全性分析及结构优化［D］．北京：北京化工大学,2010.LIU Haobo. Analysis of quickopening pressure vessel structure safety in opening process and structure optimization［D］.Beijing: Beijing University of Chemical Technology,2010.（in Chinese）［2］胡兆吉,黄克敏,文兴林．在用快开式压力容器的失效事故分析及预防对策［J］．化工装备技术,2000,21（6）：1518.HU Zhaoji,HUANG Kemin,WEN Xinlin. Analysis of the failure accident of the quickopening vessel and the prevention countermeasures［J］.Chemical Equipment Technology,2000,21(6):1518. （in Chinese）［3］何承代．一起快开门式压力容器爆炸失效事故分析［J］．机械管理开发,2012(3)：910.HE Chengdai. Analysis of the explosion of a quickopening vessel ［J］. Mechanical Management and Development,2012(3):910. （in Chinese）［4］韩树新,盛水平,刘延雷．快开门式压力容器余压开门爆炸危害研究［J］．压力容器,2010,27（2）：5054.HAN Shuxin, SHENG Shuiping, LIU Yanlei. Research on explosion of quick actuating pressure vessels with residual pressure［J］. Pressure Vessel,2010,27(2):5054. （in Chinese）［5］梅丽凤．电气控制与PLC应用技术［M］．北京：机械工业出版社,2011．MEI Lifeng. Electrical control and PLC application technology［M］. Beijing: China Machine Press,2011. （in Chinese）［6］孙康岭,杨兆伟,张晔．基于PLC的自动门控制系统设计［J］．机电工程,2010,27（11）：125126．SUN Kangling,YANG Zhaowei,ZHANG Ye. Design of the control system of automatic based on PLC［J］. Mechanical and Electrical Engineering, 2010, 27(11):125126. （in Chinese）［7］丁无极,何承代．快开门式压力容器开门形式设计研究［J］．化学工程与装备,2010（4）：9697．DING Wuji,HE Chengdai. Research on the design of the way to open the door of quickopening vessel ［J］. Chemical Engineering and Equipment,2010（4）:9697. （in Chinese）［8］雍兆铭,马兆泰,潘俊杰．压力容器快开盖结构的优化［J］．中国化工装备,2013（1）：3738．YONG Zhaomin,MA Zhaotai,PAN Junjie. Structure optimization of quickopening vessel ［J］. Chinese Chemical Equipment,2013(1):3738. （in Chinese）［9］张志军．齿啮型自紧式密封快开装置的结构设计及加工方法［J］．化学工程与装备,2011(10)：123125．ZHANG Zhijun. The structure design and manufacturing method of the gear tooth selftightening quickopening device［J］. Chemical Engineering and Equipment,2011(10):123125. （in Chinese）［10］赵轲,蔡业彬,邓昌奇．基于PLC控制的钻孔组合机床控制系统设计［J］．机电工程,2013,30（10）:6971．ZHAO Ke, CAI Yebin,DENG Changqi. Design of drill hole modular tool control system based on PLC［J］.Mechanical and Electrical Engineering,2013,30(10):6971. （in Chinese）

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20140701作者简介：高翔（1963），男，湖北武汉人，博士，教授，研究方向：机电一体化和舰船辅助机械的状态监测与自动控制.
更新日期/Last Update: 2014-09-16