|本期目录/Table of Contents|

[1]郑小涛,徐成,喻九阳,等.油封低温冷却器折流板开孔的传热性能[J].武汉工程大学学报,2012,(9):62-65.[doi:103969/jissn16742869201209014]
　ZHENG Xiao tao,XU Cheng,YU Jiu yang,et al.Performance of lowtemperature oil seal cooler with perforated baffle[J].Journal of Wuhan Institute of Technology,2012,(9):62-65.[doi:103969/jissn16742869201209014]
点击复制

油封低温冷却器折流板开孔的传热性能(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2012年9期
页码:
62-65
栏目:
机电与信息工程
出版日期:
2012-10-10

文章信息/Info

Title:
Performance of lowtemperature oil seal cooler
with perforated baffle
文章编号:
16742869(2012)09006204
作者:
郑小涛; 徐成; 喻九阳; 林纬; 彭常飞
武汉工程大学机电工程学院，湖北 武汉 430205
Author(s):
ZHENG Xiaotao;  XU Cheng;  YU Jiuyang;  LIN Wei;  PENG Changfei
School of Mechanical & Electrical Engineering，Wuhan Institute of Technology，Wuhan 430205，China
关键词:
数值模拟; 压降; 传热系数
Keywords:
numerical simulation;  pressure drop;  heat transfer coefficient
分类号:
TQ051.501
DOI:
103969/jissn16742869201209014
文献标志码:
A
摘要:
针对油封低温冷却器压降较大的问题，利用计算流体动力学（CFD）软件Fluent分析油封低温冷却器折流板开孔对冷却器流场和传热性能的影响.首先探讨不同折流板数量、壳程流速等参数对折流板开孔引起的传热性能及压降变化规律，其次分析折流板开孔对冷却器综合性能的影响，最后探寻折流板开孔后冷却器传热性能和压降关系的内在联系.结果表明，折流板开孔引起油封冷却器压降和传热系数的显著变化，且压降比传热系数变化更明显，折流板开孔后压降减少40%50%，而传热系数也降低了15%20%.在等换热面积和等压降情况下，折流板开孔冷却器传热系数可以提高10%左右.
Abstract:
Aiming at the problem of higher pressure drop for lowtemperature oil seal cooler, numerical simulation was performed for the perforated baffles based on computational fluid dynamics (CFD) techniques. The influence of the flow velocity in shell side on the variation of pressure drop and heat transfer caused by perforated baffles was studied, the effect of perforated baffles on the comprehensive properties of the cooler was analyzed and relationship between pressure drop and heat transfer coefficient owing to perforated baffles was further investigated. Results show that changes of pressure drop and heat transfer coefficient on shell side caused by perforated baffles are significant，and the change of pressure drop is more remarkable than that of the heat transfer coefficient, the pressure drop on shell side decreases by 40%-50%, while the heat transfer coefficient decreases by 15%-20% for perforated baffles; comparing with the lowtemperature oil seal cooler with original baffles, the heat transfer coefficient of lowtemperature oil seal cooler with perforated baffles can be increased by 10% in the case of equivalent heat transfer area and pressure drop.

参考文献/References:

［1］林宗虎.强化传热其工程应用\[M\]. 北京:机械工业出版社,1985.
［2］史美中.热交换器原理与设计\[M\].南京:东南大学出版社,1995.
［3］顾维藻.强化传热\[M\]. 北京：科学出版社,1990.
［4］吴峰，李青.热声理论的研究进展\[J\].武汉工程大学学报,2012,34(1):16.
［5］王为良.管壳式换热器壳侧流场数值模拟\[D\].北京：中国石油大学，2010.
［6］喻九阳,王泽武.单弓形折流板开孔试验研究\[J\].石油化工设备，2004:33(2): 46.
［7］明廷臻，周程，刘伟.管内填充环状金属多孔介质强化传热优化分析\[J\].武汉理工大学学报，2011,33（3）：6266.
［8］黄晓艳，王华. R245fa传热特性的实验研究\[J\].武汉理工大学学报，2011，33(3):6771.

相似文献/References:

[1]肖云,周春梅,吴燕玲,等.露天采场高陡岩质边坡典型地段稳定性分析[J].武汉工程大学学报,2009,(03):34.
　XIAO Yun,ZHOU Chun mei,WU Yan ling,et al.Study on stability analysis of the typical area in highsteep slope of open pit[J].Journal of Wuhan Institute of Technology,2009,(9):34.
[2]刘繁,汪建华.TE103单模谐振腔的计算模拟及优化[J].武汉工程大学学报,2009,(03):56.
　LIU Fan,WANG Jian hua.Numerical simulation and optimization of electromagnetic field of TE103 singmode cavity[J].Journal of Wuhan Institute of Technology,2009,(9):56.
[3]庄芸.预应力碳纤维布加固梁最佳预应力水平的确定[J].武汉工程大学学报,2008,(04):15.
　ZHUANG Yun.Determination of the best prestressed level to reinforced concrete beams strengthened with prestressed carbon fiber reinforced polymer [J].Journal of Wuhan Institute of Technology,2008,(9):15.
[4]魏化中,张志辉,帅健,等.基于有限元分析的下排渣门设计[J].武汉工程大学学报,2010,(05):85.[doi:10.3969/j.issn.16742869.2010.05.023]
　WEI Hua zhong,ZHANG Zhi hui,SHUAI Jian,et al.Structural design of the lower discharge gate based on FEA[J].Journal of Wuhan Institute of Technology,2010,(9):85.[doi:10.3969/j.issn.16742869.2010.05.023]
[5]管昌生,万兆,胡平放.地源热泵地埋管多层岩土温度场的数值分析[J].武汉工程大学学报,2011,(04):42.[doi:10.3969/j.issn.16742869.2011.04.011]
　GUAN Chang sheng,WAN Zhao,HU Ping fang.Numerical analysis on multilayer geotechnical temperature field of GSHP buried tube[J].Journal of Wuhan Institute of Technology,2011,(9):42.[doi:10.3969/j.issn.16742869.2011.04.011]
[6]孙亚忠,陈作炳,董新营.立磨内部流场的数值模拟[J].武汉工程大学学报,2011,(04):89.[doi:10.3969/j.issn.16742869.2011.04.023]
　SUN Ya zhong,CHEN Zuo bing,DONG Xin ying.Numerical simulation study of internal flow field in vertical roller mill[J].Journal of Wuhan Institute of Technology,2011,(9):89.[doi:10.3969/j.issn.16742869.2011.04.023]
[7]梅启双,张电吉,周春梅,等.充填体支护性能对采场围岩应力应变影响机理[J].武汉工程大学学报,2011,(07):69.
　MEI Qishuang,ZHANG Dianji,ZHOU Chunmei,et al.Influence mechanism of supporting property of fillmaterial on surrounding rock stress and strain of stope[J].Journal of Wuhan Institute of Technology,2011,(9):69.
[8]肖瑶,郑贤中,周宁波.卫星天线锅盖冲压成形模拟与优化[J].武汉工程大学学报,2011,(09):96.
　XIAO Yao,ZHENG Xianzhong,ZHOU Ningbo.Stamping simulation and optimization of satellite antenna pot[J].Journal of Wuhan Institute of Technology,2011,(9):96.
[9]舒安庆,刘凯,马长春,等.生物反应器内搅拌器的优化设计[J].武汉工程大学学报,2011,(11):66.
　SHU An qing,LIU Kai,MA Chang chun,et al.Optimization design of stirrer in bioreactor[J].Journal of Wuhan Institute of Technology,2011,(9):66.
[10]夏世友,张电吉,夏亮,等.有限差分强度折减法求解边坡安全系数[J].武汉工程大学学报,2012,(4):19.
　XIA Shi\|you,ZHANG Dian\|ji,XIA Liang,et al.Strength reduction finite difference method for solving safety factor of slope[J].Journal of Wuhan Institute of Technology,2012,(9):19.
[11]刘玉华,喻九阳,郑小涛,等.气气混合器的三维流场数值模拟[J].武汉工程大学学报,2008,(02):108.
　LIU Yu hua,YU Jiu yang,ZHENG Xiao tao,et al.The numerical simulation of fluid flow in a threedimensionalmodel of gasgas mixer[J].Journal of Wuhan Institute of Technology,2008,(9):108.

备注/Memo

备注/Memo:
收稿日期：20120707基金项目：国家自然科学基金项目（50976080）；武汉工程大学科学研究基金项目(14125061)；武汉工程大学研究生创新基金（CX201127）作者简介：郑小涛(1982)，男，湖北武汉人，讲师，博士.研究方向：结构强度、材料损伤与变形.
更新日期/Last Update: