|本期目录/Table of Contents|

[1]杨帆,程雯,陆煊,等.基于EASYARM2103倒车雷达的设计[J].武汉工程大学学报,2011,(01):96-99.[doi:10.3969/j.issn.16742869.2011.01.024]
　YANG Fan,CHENG Wen,LU Xuan,et al.Design of backdraft radar based on EASYARM2103[J].Journal of Wuhan Institute of Technology,2011,(01):96-99.[doi:10.3969/j.issn.16742869.2011.01.024]
点击复制

基于EASYARM2103倒车雷达的设计(/HTML)
分享到：

《武汉工程大学学报》[ISSN:1674-2869/CN:42-1779/TQ]

卷:
期数:
2011年01期
页码:
96-99
栏目:
机电与信息工程
出版日期:
2011-01-30

文章信息/Info

Title:
Design of backdraft radar based on EASYARM2103
文章编号:
16742869(2011)01009604
作者:
杨帆1; 2; 程雯1; 陆煊1; 杜四平1
1.武汉工程大学 电气信息学院,湖北 武汉 430074;
2.武汉工程大学智能机器人湖北省重点实验室，湖北 武汉 43004
Author(s):
YANG Fan;  CHENG Wen;  LU Xuan;  DU Siping
1.School of Electronic and Information Engineering, Wuhan University of Engineering, Wuhan 430074, China;
2.Hubei Province key Laburatory of Intelligent Robot, Wuhan Instinte of Technology, Wuhan 430074, China
关键词:
倒车雷达; 超声波测距; EASYARM2103; 液晶屏OCM128643
Keywords:
The backdraft radar was designed by ultrasonic principle. The 32 binary elements ARM LPC2103 of the demo board EASYARM2103 is utilized as digital circuit processor. Ultrasonic ranging module V2.0 produced by Ling yang Corporation is utilized as ranging system.OCMJ28643 is utilized as LCD and the developing software is ADS1.2.The idea of modularization has been used to divide the system into ultrasonic measuring part and LCD part. In this way;  the work has been simplified and the procedures maintenance and promotion have also been easily conducted. The distancemeasuring of backdraft radar ranges from 140 cm to 40 cm;  the blind zone is under 40cm and the measurement error is 5 cm.
分类号:
U463；TP273
DOI:
10.3969/j.issn.16742869.2011.01.024
文献标志码:
A
摘要:
根据超声波测距原理设计了一款倒车雷达系统,采用EASYARM2103开发板中的32位ARM处理器LPC2103作为数字电路处理器,超声测距采用凌阳公司的超声波测距模组V2.0,液晶屏采用OCM128643,开发软件用的是ADS1.2.系统设计采用了模块化的设计思想,把系统分为超声波测距部分和液晶显示部分,这样不仅简化了调试的工作量,同时方便程序的维护和升级.倒车雷达测距范围为140 cm到40 cm,40 cm以下为盲区,测量误差为5 cm.
Abstract:
car reverse radar; ultrasonic ranging; EASYARM2103; LCD OCM128643

参考文献/References:

［1］崔海朋.基于MSP430F2274单片机的倒车雷达设计［J］.汽车电子,2008,9(1):8183.
［2］熊继鹏，张俊，娄联堂.基于多智能体的交通控制仿真系统［J］.武汉工程大学学报,2010，32(12):8588.
［3］肖炎根.基于超声波的倒车雷达系统设计［J］.电子元器件应用,2008,10(7):5962.
［4］王红云.基于超声波测距的倒车雷达系统设计［J］.自动控制与仪器仪表,2008,5(8):6973.
［5］CbingCbib.Tsai. A Localization system of a mobile robot by fusing deadreckoning and ultrasonic measurement［J］. IEEE Transcactions on Instrumentation&Measurement,1998,42(8):139140.
［6］田苗,魏洪兴.嵌入式系统设计与实例开发［M］.北京:清华大学出版社,2008:1114.
［7］E.H.Jocoy. Adapting Radar and Tracking Technology to OnBoard Automotive Collison Warning System［J］. IEEE MTTS International Microwave Symposium,1998,12(2):1217.
［8］胡学军,滕达,胡林文.基于MATLAB的时滞对象控制算法仿真分析［J］.武汉工程大学学报,2010，32(3):9295.

相似文献/References:

备注/Memo

备注/Memo:
收稿日期：20100618基金项目：湖北省教育厅重点项目（D20081504）.作者简介：杨帆（1966），女，湖北公安人，教授，硕士.研究方向：智能仪器与测控技术.
更新日期/Last Update: